Straight Edge lumber without a Jointer / Easy Jointer Jig / Table Saw Sled
I was in the middle of project and needed to joint a few boards to get ready to join them together. A jointer would be the obvious solution, but I don't have one of those. I did the next best thing. I built an easy jointer jig using leftover plywood scraps from around my shop. Getting a straight edge on your lumber opens up a world of possibilities. With this straight edge jig, I was able to buy rough cut lumber, which is typically cheaper than your S4S lumber bought at the big box stores. i'm calling it, the gateway to woodworking progression. While i think its necessary to have a planer, you can get buy with a jointer jig and planer in MOST situations. So if you have a table saw and you are looking to increase your capability, this is just one of the table saw sleds you need for your shop.
Tools and for this build (affiliate)
Toggle Clamps - https://amz.run/6XXc
Titebond Quick and Thick https://amz.run/6XXc
Pica dry pencil - https://amz.run/6XXe
Sanding Blocks - https://amz.run/6XXf
